-
etsa hlobo ea ente ea polasetiki...
Litšebeletso:etsa likarolo tsa hlobo le ente ho latela setšoantšo kapa sampole ea hau.
Nako ea Mold: 2-3 libeke
Nako ea ente ea likarolo tsa polasetiki:1-2beke tse ipapisitseng le bongata
Odara:Taelo e nyane e amoheloa
Mokhoa oa ho romella:Ups,Dhl,Fedex,Tnt,ka leoatle,ka moea
Mekhoa ea ho lefa:TT/Paypal/WU/LC
Ka kopo, romella lengolo-tsoibila ho rona bakeng sa lintlha tse ling. :-)
-
Custom Electronic Plastic P...
Sehlopha sa Litsebi: Likarolo tsa ente e tloaelehileng ho latela litlhoko tsa hau.
Tšebeletso ea ODM/OEM:Moqapi oa Tlhahiso le Mould Design, Mold etsa, likarolo tsa ente, li kopane.
Lintho tsa polasetiki:PS, ABS, PP, PVC, PMMA, PBT, PC, POM, PA66, PA6, PBT+GF, PC/ABS, PEEK, HDPE, TPU, PET, PPO, ... joalo-joalo.
Mold Base:FUTA, HASCO, DME,LKM, ... joalo-joalo.Kapa ho latela Tlhokahalo ea Bareki.
Mold:Nak80,P20, 2311, H13, 2344, Starvax 420, 236, AdC3, S136, 2312, 2379, 2316, 2083, 2767 ... joalo-joalo.
Sephutheloana:lebokose la lepolanka bakeng sa ho romela hlobo ka ntle le phalete bakeng sa likarolo.
-
ODM Ente likarolo Molding...
Tšebeletso e le 'ngoe:Re fana ka moralo oa hlobo, ho etsa hlobo e nepahetseng ea polasetiki, ho bopa ente ea polasetiki ea boleng bo holimo, Mosebetsi oa Kopano.
1.OEM/ODM:tloaelo boleng bo phahameng ente polasetiki likarolo bōptjoa.
2-Lisebelisuoa tsa hlobo ea ente:ABS/PC/PP/HDPE/POM/PA6/PA6+GF/PVC/NYLON/PMMA/PET Ect.
3-Kalafo ea likarolo:Texture/Sandy/MT/YS/SPI/EDM finish/smooth/glossy/VDI.
4.Ho nepahala ha hlobo:+-0.01mm
5.Mohlala: Sampula ea mahala ea likarolo tsa ho bopa ente e fanoa.
5.Tumellano ea lekunutu:Boloka morero oa tšebelisano e le lekunutu ka ho feletseng 'me u ke ke ua o rekisetsa bareki ba bang.
-
2 ho 1 Seqhaqhoa sa Khalase ea Lifensetere...
Mosebetsi:Sekhase sa Khalase ea Fesetere ea Koloi+Seat Belt Cutter
Boitsebiso:ABS + Aluminium motsoako
Mmala:E Ntsho, Silevera, Khubedu
Nako ea thomello:matsatsi a 3-5
Mohlala:amoheloe tekong ea bolengKa kopo, romella lengolo-tsoibila ho rona bakeng sa lintlha tse ling.
-
Mould Ente e Tloaelehileng Se...
Lintho tsa Plastiki:ABS,PC,PP,PEEK,TPU,PA,PA+GF,POM,PE,UPE,PTFE, joalo-joalo
Mould Material:S136,H13,NAK80,2344,2343,SKD61, joalo-joalo
Qetello ea Plastic Surface:Qetello ea ho bentša, Ho Qetella Sebopeho, Qetello e benyang, ho penta, khatiso ea Slik, Penta ea Rabara jj.
Nako ea Mold:3-5 libeke
Nako ea ho bopa:Libeke tse 1-2 ho latela bongata.
Tšebeletso e le 'ngoe ea ho emisa:re fana ka tharollo ea likarolo tsa polasetiki tsa ente ho tloha moralo ho fihlela qetellong.
Re romelle potso ea mahala bakeng sa lintlha tse ling, re tla u fa quotation nakong ea lihora tse 24.
-
Karohano ea Ente ea Plastiki...
OEM/ODM:Iketsetse moralo ofe kapa ofe oo u o batlang ka mor'a setšoantšo sa hau kapa sampole.
Lintho tsa polasetiki: PC/ABS, ABS, PC, PVC, PA66, POM kapa tse ling tseo u li batlang.
Bokaholimo ba polasetiki:Teko Qetella, Qetello e benyang, Qetello e benyang, ho penta, khatiso ea Slik, joalo-joalo
Ho nepahala: +/- 0.01MM
Nako ea Mold:3-5beke tse thehiloeng ho sebopeho sa hlobo.
Nako ea tlhahiso:1-2beke tse ipapisitseng le bongata.
TLHOKOMELISO Ho etsa Mold le moralo oa lihlahisoa tsa mahala
-
Lihlahisoa tsa Plastiki tse Itokiselitsoeng...
Tšebeletso e le 'ngoe ea ho emisa:re fana ka tharollo ea ho etsa likarolo tsa polasetiki ho tloha ho moralo ho ea ho kopana.
Mould Material:S136,H13,NAK80,2344,2343,SKD61, joalo-joalo
Lintho tsa Plastiki:ABS,PC,PP,PEEK,TPU,PA,PA+GF,POM,PE,UPE,PTFE, joalo-joalo
Qetello ea Plastic Surface:Qetello ea ho bentša, Ho Qetella Sebopeho, Qetello e benyang, ho penta, khatiso ea Slik, Penta ea Rabara jj.
Nako ea Mold:3-5 libeke
Nako ea ho bopa:Libeke tse 1-2 ho latela bongata.
-
Inje ea Plastiki e Phahameng ka ho Fetisisa...
Lihlahisoa :e hlophisitsoeng e ipapisitse le setšoantšo sa 3D kapa sampole
Mmala :Mmala o tlwaelehileng kapa o kgethehileng
Mohlala:sampole ea mahala e ka fanoa
Mongobo:Sebaka se le seng le sekoti se le seng
Sistimi ea semathi:semathi se chesang le semathi se batang
Kopo:e sebelisoa haholo ho Elektronike, likarolo tsa Botle, Likarolo tsa Lipapali, Likarolo tsa Auto, Lisebelisoa tsa bongaka joalo-joalo.
Ka kopo romella lipotso bakeng sa lintlha tse ling tse buang.
-
Fektheri OEM Mold High Prec...
OEM/ODM:re ka etsa moralo o hlophisitsoeng o ipapisitseng le setšoantšo sa hau kapa sampole.
Nako ea Mold: 2-3 libeke
Nako ea ente ea likarolo tsa polasetiki:1-2beke tse ipapisitseng le bongata
Odara:Taelo e nyane e amoheloa
Mokhoa oa ho romella:Ups,Dhl,Fedex,Tnt,ka leoatle,ka moea
Mekhoa ea ho lefa:TT/Paypal/WU/LC
Ka kopo, romella lengolo-tsoibila ho rona bakeng sa lintlha tse ling. :-)
-
OEM ODM Ente Molding Molding O...
Tshebeletso: Kemiso e qaqileng ea tlhahiso le litlaleho tsa beke le beke tse nang le litšoantšo le livideo tsa digital li tla bontšoa nakong ea ts'ebetso.
Mold Material :S136,H13,NAK80,2344,2343,SKD61,P20 joalo-joalo.
Sebopeho sa ho taka:MOHATO, AutoCAD, Solidworks, joalo-joalo.
Mmala :Mmala o tlwaelehileng kapa o kgethehileng
Nako ea tlhahiso:Lithunya tse 300000 ho isa ho tse 1,000,000 tsa Shots.
Mongobo:Sebaka se le seng le sekoti se le seng
Sistimi ea semathi:semathi se chesang le semathi se batang
-
Ente e Tloaelehileng Mold China...
TLHOKOMELISO Ho etsa Mold le moralo oa lihlahisoa tsa mahala
Nako ea Mold:3-5beke tse thehiloeng ho sebopeho sa hlobo.
Nako ea tlhahiso:1-2beke tse ipapisitseng le bongata.
OEM/ODM:Re ka hlakisa tlhoko ea hau hang ha u fumana setšoantšo kapa sampole
Lintho tse bonahalang:PC/ABS, ABS, PC, PVC, PA66, POM kapa tse ling tseo u li batlang. Lintho tse ngata tseo u li khethang.
Kopo:Elektronike, likarolo tsa Botle, Ka tlung, Likarolo tsa Auto, Lisebelisoa tsa bongaka le tse ling.
-
Ente e Tloaelehileng ea ABS Moldin...
OEM/ODM:Iketsetse moralo ofe kapa ofe oo u o batlang ka mor'a setšoantšo sa hau kapa sampole.
Lintho tsa polasetiki: PC/ABS, ABS, PC, PVC, PA66, POM kapa tse ling tseo u li batlang.
Bokaholimo ba polasetiki:Teko Qetella, Qetello e benyang, Qetello e benyang, ho penta, khatiso ea Slik, joalo-joalo
Ho nepahala: +/- 0.01MM
Nako ea Mold:3-5beke tse thehiloeng ho sebopeho sa hlobo.
Nako ea tlhahiso:1-2beke tse ipapisitseng le bongata.
TLHOKOMELISO Ho etsa Mold le moralo oa lihlahisoa tsa mahala
